Produkt bild Produkt namn
MI 1005 Medical Ethernet Isolator

The MI 1005 medical network isolation module is suitable for the use in 10/100/1000-BaseT-Ethernet Gigabit networks with full IEEE 802.3 compatibility.If PCs or other electrical devices are connected to an Ethernet network in the patient’s environment in admissible leakage currents can appear from other devices that are also connected to network. The MI 1005 blocks these currents and voltages over the copper network. Compared to other network isolation devices that are available on the market the MI 1005 is the only device available with a signal isolation strength of 5.000 V within full IEEE 802.3 Gigabit Network support.

DVI-Isolator STD-1

The STD-1 optical DVI module transmits four (4) optical data, Red, Green, Blue and clock and can be
extended up to 1,000 meters (4920ft) over one (1) SC single or multi-mode fiber at WUXGA
(1920×1200), 60Hz vertical refresh rate. The EDID (Extended Display Identification Data) in a display
can be read and restored by just plugging once transmitter to the display. This Self-EDID
programming feature makes the installation of STD-1 more easy and flexile at any variable resolution
display systems. The key features of STD-1 is, by using an optical splitter, one (1) signal from
transmitter can be copied up to sixteen (16) times and it gives you a cost effective and space saving
installation for various application. For your convenience, UXGA EDID would have been done
before shipment as a default.

USB 1.1 Isolator MED

At just 2.0 x 1.7 x 0.8 inches, these little isolators pack a powerful punch against electrical noises, surges and spikes up to 4kV isolation. Protect expensive PCs and equipment from damaging electrical storms, power surges and other high EMI/RFI disturbances. This isolation barrier eliminates ground loops which are disruptive in measurement applications. USB 1.1 Isolator MED designed to meet UL60601 specification*, isolates up to 4kV – strong enough for hospital and medical use. These isolators are USB bus powered and provide up to 100mA of current to attached downstream devices.

USB Ranger 2224
Multimode Fiber Optic USB 2.0 ExtenderPowered by ExtremeUSB. Long reach USB 2.0 enabled by Icron’s LionsGate™ USB 2.0 Extension ASIC.
Extends USB 2.0 high-speed and USB 1.1 (low-speed, full speed) devices up to 500m over fiber optics.
Supports all USB device types: Control, Interrupt, Bulk and Isochronous at up to 480Mbps.
Operates with USB 2.0 high-speed host controllers and USB 1.1 classic hosts.
True plug and play, ready to operate right out of the box. No new driver installation required. Supports all major operating systems including Windows• ®, Mac OS®, and Linux®.
Integrated hub provides four remote USB 2.0 ports. Number of devices can be increased using additional USB hubs.
AC power adapter at remote unit provides standard 500mA to each USB port.
Power adapter at local unit is not required for normal operation.
Ideal for a wide variety of USB devices, from printers, scanners, hard drives, and audio devices, to touch screens, web cams, and game controllers.